How to Care for Aluminum Furniture

Aluminum furniture is easy to care for, but it still needs the right cleaning routine.

Alumproject furniture is made from anodized aluminum, which is designed to last for years with minimal effort. The material resists rust, does not fade in sunlight, and keeps its original shine even in humid rooms.

With simple regular care, your aluminum table, shelf, stand, or storage piece will stay clean, modern, and beautiful for a long time.

Daily care

For everyday cleaning, use a dry or slightly damp microfiber cloth.

This is usually enough to remove:

• dust;

• fingerprints;

• light marks;

• small water spots;

• everyday surface dirt.

Wipe the surface gently. Do not press too hard, especially on glossy or polished areas.

Alumproject recommends using a dry or slightly damp microfiber cloth for daily care and avoiding abrasive sponges or powders because they can leave micro-scratches on the anodized layer.

Deep cleaning

For deeper cleaning, you do not need strong chemicals.

Use:

• warm water;

• a small drop of neutral soap;

• a soft cloth;

• clean water for rinsing;

• a dry microfiber cloth.

A good deep cleaning routine is:

1. Mix warm water with a drop of neutral soap.

2. Apply the solution with a soft cloth.

3. Clean the surface gently in circular motions.

4. Rinse with clean water.

5. Dry the furniture thoroughly to prevent streaks.

Alumproject recommends deep cleaning every 3–6 months with warm water and neutral soap, then rinsing with clean water and drying thoroughly. 

Matte vs. glossy surfaces

Different finishes may need slightly different cloths.

For matte aluminum surfaces, use short-pile microfiber. It helps clean the surface without leaving too much texture or lint.

For glossy surfaces, use long-pile microfiber. It is softer and better for surfaces where small marks or streaks are more visible.

This small detail can make cleaning easier and help the finish look better after wiping. Alumproject gives the same recommendation for matte and glossy surfaces in its care instructions.

What not to use

Some cleaning products can damage aluminum furniture.

Avoid:

Alumproject specifically warns against acidic cleaners, bleach or chlorine-based products, metal brushes, and steam cleaners.

How to remove fingerprints

Fingerprints are normal, especially on smooth metal surfaces.

To remove them:

1. Use a slightly damp microfiber cloth.

2. Wipe gently.

3. Dry the surface with a clean cloth.

Do not use abrasive pads or aggressive sprays. In most cases, water and microfiber are enough.

How to clean grease stains

If the furniture is used in a kitchen, dining area, or near food, grease stains may appear.

For grease stains, Alumproject recommends using glass cleaner spray with a soft cloth. 

Spray the cleaner onto the cloth, not directly onto the furniture. Then wipe the surface gently and dry it after cleaning.

Outdoor care

Some aluminum furniture can be used outdoors or in covered outdoor areas, but outdoor use needs extra care.

After rain, wipe the furniture dry. Water droplets can leave salt marks, especially if the furniture is exposed to outdoor air, dust, or minerals in rainwater. Alumproject recommends wiping outdoor furniture dry after rain for this reason. 

For outdoor use, also try to avoid:

• standing water;

• long exposure to dirt;

• harsh cleaning chemicals;

• dragging objects across the surface;

• leaving wet items on the furniture for a long time.

How to prevent scratches

Aluminum is durable, but the surface can still be scratched by hard or sharp objects.

To protect the finish:

• lift objects instead of dragging them;

• use coasters under cups and planters;

• use felt pads under decor pieces;

• avoid metal trays without soft protection underneath;

• do not clean with rough sponges or brushes.

Alumproject describes its aluminum furniture as durable, scratch-resistant, and suitable for daily use, but still recommends avoiding abrasive materials when cleaning.

What to do with minor scratches

Small surface scratches may sometimes be polished.

For minor scratches, Alumproject recommends felt and GOI polishing paste No.1 suitable for aluminum. 

If you are not sure how to polish the piece, contact Alumproject first. It is better to ask before trying to fix the surface yourself.

How often should I clean aluminum furniture?

For most interiors:

• wipe dust and fingerprints as needed;

• do light cleaning weekly or every few weeks;

• do deeper cleaning every 3–6 months;

• clean immediately after spills;

• dry after outdoor rain exposure.

The exact frequency depends on where the piece is used. A living room table may need only light wiping. A kitchen table, retail display, or outdoor piece may need more frequent cleaning.

Simple care checklist

To keep your aluminum furniture in good condition:

• use microfiber cloths;

• clean with mild soap and water when needed;

• dry the surface after cleaning;

• avoid acidic cleaners;

• avoid bleach and chlorine;

• avoid metal brushes;

• avoid abrasive powders;

• wipe outdoor pieces dry after rain;

• lift objects instead of dragging them.

Final advice

Aluminum furniture does not need complicated care.

Treat it gently, clean it regularly, and avoid harsh products. A soft cloth, mild cleaner, and a few minutes of attention are usually enough to keep your Alumproject piece looking clean, modern, and ready for everyday use.